BA226: No cartridge is in the QuikStor drive¶
| Error code | Product | Applies to |
|---|---|---|
| BA226 | BackupAssist | BackupAssist v4 and later |
Description¶
This error is produced when an RDX cartridge cannot be found in the drive by BackupAssist when performing a destination check.
Resolution¶
There are 4 possible resolutions for this problem
Resolution 1 - Insert cartridge in the drive¶
If there is not a cartridge within the drive, then this error will be produced. To resolve this error, insert an RDX cartridge into the RDX drive being used for the backup and re-run the backup job.
Resolution 2 - Run a backup through Windows Backup natively¶
Running a backup through Windows Backup natively will help isolate the issue from being an issue with Windows (see Solution 3 below) or specifically to BackupAssist.
The following video outlines how to do this: https://www.youtube.com/watch?v=nBNs9NIIP08.
Resolution 3 - Try to access the cartridge through Windows¶
Attempting to access the cartridge through Windows Explorer will determine if the cartridge can be seen within Windows.
If you're unable to see the drive through Windows, then this could mean there is an issue with the hardware or that the drives for the RDX drive are not installed correctly.
Resolution 4 - Try a second cartridge¶
Trying a second RDX cartridge will help determine if the problem is with the cartridge you are using or the RDX drive itself.
| Last updated | Created | Further assistance |
|---|---|---|
| 04th Sep 2015 | 16th Mar 2007 | BackupAssist Support page |